Drivedata DR3 Manuel d'utilisateur télécharger pdf (Page 63)

DR3 User’s Manual

- 57 -

7.7.4 Connection

Simply connect the External Beacon Receiver into the Beacon jack on the DR3 and

point the External Beacon Receiver to the Beacon. The Lap Timer will start to work

when Beacon signal is detected.

7.7.5 Mask Time

The Mask Timer is the time interval that DR3 doesn’t response after the detection of

Beacon & Split Beacon signal. The default value is 10 sec. If the time interval of twice

signal from Beacon & any Split Beacon emitter is small than Mask Time that you set,

the second signal will be ignored by DR3 .

When Split Beacon option is enabled, any Split Beacon emitter & standard Beacon

emitter will be similar as signal emitter.

Maybe you would like to display summary of Lap Timer information on screen after

recording video playback is finish when you replay video on PC.

Pick up Display Summary after Stop option to display all Lap Timer information on

screen after recording video finish playback.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 191 192

Pas de commentaire

Drivedata DR3 Manuel d'utilisateur Page 63